MAXScanner calculator widget

Tee Section Weight Calculator — T-Bar kg/m, lb/ft & Total Weight

Editable live calculator

Change any input — the result updates immediately

No hidden assumptions. Inputs, units and the working stay visible so you can check the calculation.

Section dimension unit Overall tee depth Flange width Web / stem thickness Flange thickness Piece length unit Piece length Number of pieces Whole pieces only.Material density (kg/m³) Use documented density for the actual material.Procurement allowance (%) Applied to order mass, not theoretical kg/m.Rate per kg (optional) 0 disables cost.Target mass unit Target mass (optional) Reverse-solves whole entered-length pieces.Standard / supplier kg per metre (optional) Reports variance without replacing ideal geometry.

Calculated result

631.14 kg · 1,391.43 lb

10.519 kg/m · 7.0684 lb/ft

1,340 mm² ideal sharp-corner area · 63.114 kg per piece

631.14 kg net batch mass

Enter rate/kg for procurement cost

Enter target mass for reverse whole-piece count

Enter standard/mill kg/m to compare against ideal geometry

Show the working

1. Ideal tee area = 80 × 10 + (100 − 10) × 6 = 1,340 mm².
2. Unit mass = 1,340 × 10⁻⁶ × 7,850 = 10.519 kg/m.
3. Piece mass = 10.519 × 6 = 63.114 kg.
4. Net batch = 63.114 × 10 = 631.14 kg.

This is an ideal sharp-corner tee-section mass estimate. Rolled tees and tees split from beams can include root radii, flange taper and dimensional tolerances. Use the current governing section table or mill certificate for a named standard tee, procurement, lifting-critical or structural work.

More actions

Shared links reopen these inputs. Recent and saved calculations stay in this browser unless you clear site data.