One formula for wheels, pulleys and cutting tools
Peripheral speed is the speed of a point on the rim: v = π × d × n. With d in millimetres and n in revolutions per minute, v in m/min = π × d × n ÷ 1000 and v in m/s is that divided by 60. The other way round, n = v × 1000 ÷ (π × d). A 300 mm pulley at 1,450 rpm runs at 1,366.6 m/min, or 22.8 m/s. In machining the same formula turns a cutting speed vc into the spindle speed: a 10 mm HSS drill in steel at 25 m/min needs 796 rpm. Enter a diameter and either the rpm or the speed; machining mode adds feed per tooth × cutting edges × rpm for the feed rate and start values for HSS and carbide in steel, stainless steel and aluminium.
How to use this calculator
Choose peripheral speed for wheels, rollers, pulleys, saw blades and grinding discs, or machining for drilling, milling and turning.
Pick what you know: the rpm (you get the speed) or the speed (you get the rpm). Machining mode can fill the cutting speed from a tool and material preset.
Enter the diameter: the outside diameter of the wheel or tool, or the workpiece diameter at the cut when turning.
For the feed rate, enter the feed per tooth and the number of cutting edges (1 for turning, 2 for a twist drill), and the machine maximum if it has one.
Where people use it
- •Checking a grinding or cut-off disc: a 125 mm disc on an 11,000 rpm angle grinder runs at 72.0 m/s, inside an 80 m/s rating.
- •Belt, conveyor and roller speed from motor rpm and pulley or drum diameter.
- •Spindle speed for a drill, end mill or lathe job from the cutting speed in the tool maker’s table.
- •Converting SFM from an American tool catalogue to m/min and rpm, or the other way round.
Example: 10 mm drill in steel, HSS against carbide
Eylert gives 25–30 m/min for an HSS twist drill in steel (group P1), so a 10 mm drill runs at 25 × 1000 ÷ (π × 10) = 796 to 955 rpm. Horn gives 80–100 m/min for its solid carbide drills in C15 steel: 2,546 to 3,183 rpm, about 3.2 times faster. With Horn’s feed of 0.25 mm per revolution for a 10 mm drill, the carbide drill at 2,546 rpm feeds 0.25 × 2,546 = 637 mm/min.
What the formula does not check
- •The presets are drilling start values from two tool makers. End mills, inserts and coated tools have their own tables, and the number on your tool box or insert packet comes first.
- •Cutting speed depends on the material grade, coolant, depth of cut and machine rigidity. Start at the lower value and raise it while the chips and the tool edge look right.
- •For turning, the diameter changes with every pass, so the rpm for a constant cutting speed changes too (constant surface speed, G96 on CNC lathes).
- •A wheel or disc must never run faster than the maximum speed printed on it. For mounted points the permitted rpm also depends on the shank length (PFERD: DIN 69170), which can be lower than the peripheral-speed formula gives.
- •The formula gives kinematics only. It says nothing about balance, burst strength, belt slip or cutting forces.
Frequently asked questions
How do I calculate peripheral speed?+
Multiply π by the diameter and the rpm: v = π × d × n. With d in mm and n in rpm, divide by 1,000 for m/min and by 60,000 for m/s. A 300 mm pulley at 1,450 rpm: π × 300 × 1,450 ÷ 1,000 = 1,366.6 m/min = 22.8 m/s = 82.0 km/h.
How do I calculate rpm from cutting speed?+
n = vc × 1000 ÷ (π × d), with vc in m/min and d in mm. A 10 mm drill at 25 m/min: 25,000 ÷ 31.42 = 796 rpm. In inches, rpm = SFM × 12 ÷ (π × D): 100 SFM with a 0.5 in tool gives 764 rpm.
How do I calculate the spindle speed for turning?+
Use the workpiece diameter at the cut and the cutting speed from the insert maker. If the insert box says 200 m/min, a 50 mm bar turns at 200,000 ÷ (π × 50) = 1,273 rpm. With a feed of 0.2 mm per revolution the carriage moves 0.2 × 1,273 = 255 mm/min.
How do I calculate the feed rate for milling?+
Feed rate vf = fz × z × n: feed per tooth times the number of teeth times the rpm. A twist drill has 2 cutting edges, so a drill feed of 0.25 mm per revolution is 0.125 mm per edge, and at 2,546 rpm both give 637 mm/min.
What cutting speed should I use for steel, stainless steel and aluminium?+
For drilling, Eylert gives 25–30 m/min for HSS in steel, 10–15 m/min for cobalt HSS in stainless steel and 70–80 m/min for HSS-Alu in aluminium. Horn gives 80–100 m/min for solid carbide drills in C15 steel, 40–50 m/min in austenitic stainless steel and 250–300 m/min in AlMgSi aluminium.
What if my machine cannot reach the calculated rpm?+
Then the tool cuts slower than planned: vc = π × d × n_max ÷ 1000. A 3 mm carbide drill in aluminium at 250 m/min would need 26,526 rpm; on a machine that stops at 6,000 rpm it cuts at 56.5 m/min. Enter the machine maximum to see this.
How fast may a 125 mm grinding disc turn?+
At most the rpm printed on it. For a disc rated 80 m/s the formula gives n = 80 × 60,000 ÷ (π × 125) = 12,223 rpm; an 11,000 rpm angle grinder keeps it at 72.0 m/s.
Semantic next steps
Continue the calculation
These links move to a different input, formula or project stage rather than a keyword variation of this page.
Gear Ratio RPM Calculator — Speed, Cruise RPM & Overall Ratio
Solve theoretical road speed from RPM or engine RPM from road speed using transmission ratio, final drive and tire diameter, with overall gearing kept visible.
Pump Impeller Tip Speed Calculator — From RPM
Calculate impeller peripheral tip speed from rotational speed and diameter, with revolutions per second and circumference as audit outputs.
Motor Torque Calculator — Torque, Power & RPM
Calculate electric motor shaft torque, mechanical power or RPM from any two operating-point values, with N·m, lb·ft, kW and mechanical horsepower results.
Centripetal Force Calculator — Mass, Speed & RPM
Solve centripetal force, mass, tangential speed or radius for uniform circular motion. Use linear speed, angular speed, RPM or period and see acceleration, g-force, angular speed and substituted working.
Tire Size Calculator — Compare Diameter, Clearance & Speedometer Error
Compare two P-metric tire sizes side by side for sidewall, diameter, circumference, axle clearance and theoretical speedometer error.
Free publisher widget
Put this calculator on your website
Give readers the live calculator without rebuilding the math. Copy the responsive embed in one click, or customize width, height, border and corner radius before publishing. The branded MAXScanner attribution stays visible.
Calculator embed HTML
Paste this code into your page. Focus the code box to select it manually.
Keep the result connected to the real job
MAXScanner keeps the formula and assumptions beside the result so you can verify the number before using it in a drawing, estimate, specification, worksheet or document. Where a supplier, manufacturer, drawing or applicable standard owns a requirement, that source remains authoritative.