Which digits count
The counts in this table come from the same engine as the tool above.
| Rule | Example | Significant figures |
|---|---|---|
| Nonzero digits always count | 4.52 | 3 |
| Leading zeros never count | 0.0052 | 2 |
| Zeros between nonzero digits count | 40.05 | 4 |
| Trailing zeros count when there is a decimal point | 4.500 | 4 |
| Trailing zeros of a whole number are ambiguous | 4500 | 2 (up to 4) |
| A decimal point after a whole number makes its zeros count | 4500. | 4 |
| Scientific notation shows exactly the digits that count | 4.50 × 10³ | 3 |
Rules for + − × ÷
Worked examples from OpenStax Chemistry 2e and University Physics, recomputed by the calculator.
| Calculation | Calculator display | Reported | Rule |
|---|---|---|---|
| 1.0023 + 4.383 | 5.3853 | 5.385 | Fewest decimal places (4.383: 3) |
| 486 − 421.23 | 64.77 | 65 | Fewest decimal places (486: 0) |
| 0.6238 × 6.6 | 4.11708 | 4.1 | Fewest significant figures (6.6: 2) |
| 421.23 ÷ 486 | 0.866728395061728 | 0.867 | Fewest significant figures (486: 3) |
| 7.56 − 6.052 + 13.7 | 15.208 | 15.2 | Fewest decimal places (13.7: 1), in one step |
Rounding: half up or half to even
The two rules give different answers only when the dropped part is exactly 5, 50, 500 and so on.
| Number | Significant figures | Half up | Half to even |
|---|---|---|---|
| 1.425 | 3 | 1.43 | 1.42 |
| 0.90275 | 4 | 0.9028 | 0.9028 |
| 0.051065 | 4 | 0.05107 | 0.05106 |
| 2.5 | 1 | 3 | 2 |
| 43.55 | 3 | 43.6 | 43.6 |
| 1.42501 | 3 | 1.43 | 1.43 |
Worked examples from the calculator
Each row is computed by the same engine as the tool above.
| Case | Result |
|---|---|
| (12.11 + 18.0 + 1013) × 2.6 | 2712.086 → 2.7 × 10³ |
| (25.34 + 1.9) × 7.04, extra digits kept | 191.7696 → 192 |
| (25.34 + 1.9) × 7.04, rounded after every step | 191.488 → 191 |
| 3 × 12.45 g with 3 marked exact | 37.35 → 37.35 |
| 3 × 12.45 g with 3 treated as measured | 37.35 → 4 × 10¹ |
| 6.02e23 × 2.0 | 1204000000000000000000000 → 1.2 × 10²⁴ |
Sources: OpenStax Chemistry 2e, 1.5 Measurement Uncertainty, Accuracy, and Precision; OpenStax University Physics Volume 1, 1.6 Significant Figures; NIST SP 811, Appendix B.7 Rounding numbers; University of Calgary Chemistry Open Textbook: Rules for Rounding a Number. Read on 12 November 2026.
The significant figure rules
Significant figures are the digits of a measured number that carry meaning: every nonzero digit, zeros between them, and trailing zeros when the number has a decimal point. Leading zeros never count, so 0.004050 has 4 (4, 0, 5 and the final 0). A whole number such as 1500 is ambiguous: it has 2 significant figures if the zeros only hold the place, and up to 4 if they were measured, so write 1500. or 1.500 × 10³ when they count. In a calculation, + and − keep the decimal places of the least precise term, while × and ÷ keep the fewest significant figures: (12.11 + 18.0 + 1013) × 2.6 = 1043.11 × 2.6 = 2712.086, reported as 2.7 × 10³. The calculator counts with a reason for every digit, rounds with the rule your course uses, and works through mixed expressions one step at a time. Everything runs in your browser.
How to use this calculator
Pick a mode: Count to see how many significant figures a number has, Round to cut it to n significant figures, or Calculate to work out an expression.
Type numbers as plain decimals (0.004050), with a decimal point after a whole number (1500.), or in scientific or E notation (1.50 × 10^3, 1.50e3). Set the decimal mark to a comma if you write 0,0520.
In Count mode, paste a whole list, one number per line, and read the reason given for every digit.
In Round mode, choose how many significant figures you need and the rule for a dropped 5; when the two rules disagree, both answers are shown.
In Calculate mode, type the expression with + − × ÷ and brackets, tick any number that is exact (a count or a defined constant), and read the rule applied at each step before the final answer.
Where people use it
- •Checking a chemistry or physics homework answer before handing it in.
- •Reporting a lab result to the right precision after several steps of arithmetic.
- •Seeing why 1500 and 1500. are not the same measurement.
- •Converting a result to scientific or E notation for a spreadsheet or a lab report.
Example: one mixed calculation, step by step
(12.11 + 18.0 + 1013) × 2.6. Step 1, addition: 12.11 + 18.0 + 1013 = 1043.11. The least precise term, 1013, is known only to the ones place, so this sum is worth 1043 (4 significant figures), but the full 1043.11 is carried forward. Step 2, multiplication: 1043.11 × 2.6 = 2712.086. The factor 2.6 has 2 significant figures, so the answer is 2.7 × 10³. Written as 2700, a reader could not tell how many zeros count. Rounding after each step happens to give the same answer here, but not always: (25.34 + 1.9) × 7.04 is 192 with the extra digits kept and 191 if the sum is cut to 27.2 first.
Conventions and limits
- •Courses and labs differ on a dropped 5: many schools round it up, while NIST and the OpenStax textbooks keep the last digit even. Use the rule your teacher or lab manual asks for; the calculator shows both answers when they differ.
- •A whole number like 1500 is counted with the fewest significant figures (2). If its zeros were measured, write 1500. or 1.500 × 10³, or mark it exact if it is a count.
- •The calculator cannot know which numbers are exact. Counts (3 beakers) and defined values (1 in = 2.54 cm) must be ticked as exact, or they will limit the answer.
- •Significant figures are a quick way to show precision, not a full uncertainty analysis. For ± uncertainties, propagation of error or a result with a stated confidence level, use the method your course or standard (such as the GUM) describes.
- •Logarithms, powers, roots and functions are not supported: their sig fig rules differ (for log, the decimal places of the result match the significant figures of the input).
- •Some teachers round after every step. Turn on “Round after every step” to match that method and see where it changes the last digit.
Frequently asked questions
How many significant figures does 0.004050 have?+
Four. The three zeros before the 4 only place the decimal point, so they do not count. The 4 and 5 count, the zero between them counts, and the final zero counts because the number has a decimal point.
Is 1500 two or four significant figures?+
It is ambiguous. Without a decimal point, the trailing zeros may only hold the place, so the safe reading is 2. Write 1500. (with a point) or 1.500 × 10³ for four, 1.50 × 10³ for three, or 1.5 × 10³ for two.
What are the sig fig rules for addition and multiplication?+
For + and −, round the answer to the decimal place of the least precise term: 1.0023 + 4.383 = 5.3853, reported as 5.385. For × and ÷, keep the fewest significant figures: 0.6238 × 6.6 = 4.11708, reported as 4.1 because 6.6 has two.
How do you round to significant figures when the next digit is 5?+
If the dropped digits are more than 5 (5 followed by anything nonzero), round up. If they are exactly 5, there are two rules: round half up gives 1.425 → 1.43, round half to even gives 1.425 → 1.42. NIST and OpenStax use round half to even; many school courses round 5 up.
Do exact numbers affect significant figures?+
No. A count such as 3 trials or a defined value such as 1000 mL = 1 L has unlimited significant figures. Three samples of 12.45 g weigh 37.35 g; if the 3 were treated as a measured value with one significant figure, the answer would wrongly shrink to 40 g.
Should I round in the middle of a calculation?+
Keep at least two extra digits in intermediate results and round once at the end. (25.34 + 1.9) × 7.04 gives 192 with the extra digits kept, but 191 if the sum is rounded to 27.2 before multiplying.
How do I write a number in scientific notation with the right sig figs?+
Put one nonzero digit before the decimal point and keep exactly the significant digits after it: 0.004050 is 4.050 × 10⁻³ (4.050E-3), and 2712.086 to two significant figures is 2.7 × 10³ (2.7E+3).
Semantic next steps
Continue the calculation
These links move to a different input, formula or project stage rather than a keyword variation of this page.
Density Calculator — Solve Density, Mass or Volume + Units
Solve density, mass or volume from any two known values with SI, metric and US customary units. See equivalent density units, specific gravity and substituted working.
Molarity Calculator — Concentration, Moles, Mass or Volume
Solve amount concentration (molarity), moles, solute mass or final solution volume. Supports M, mM and µM plus mass-based calculations using molar mass.
Standard Deviation Calculator — Sample & Population Variance with Steps
Calculate sample or population standard deviation from pasted data with mean, variance, squared-deviation sum, standard error, coefficient of variation, Tukey outliers and a row-by-row deviation and z-score table.
Percentage Calculator
Solve percentage-of, what-percent, increase or decrease, percentage change, percentage difference and reverse percentage problems with the substituted working shown.
GCF and LCM Calculator with Prime Factor Steps
GCF (HCF) and LCM of up to 10 whole numbers with free steps: prime factor trees, Euclid’s algorithm and the ladder method. Exact up to 40 digits.
Grade Calculator: Weighted Grade & Final Needed
Weighted course grade from category weights, the score you need on the final exam and your letter grade on a scale you edit. Every step shown, free.
Free publisher widget
Put this calculator on your website
Give readers the live calculator without rebuilding the math. Copy the responsive embed in one click, or customize width, height, border and corner radius before publishing. The branded MAXScanner attribution stays visible.
Calculator embed HTML
Paste this code into your page. Focus the code box to select it manually.
Keep the result connected to the real job
MAXScanner keeps the formula and assumptions beside the result so you can verify the number before using it in a drawing, estimate, specification, worksheet or document. Where a supplier, manufacturer, drawing or applicable standard owns a requirement, that source remains authoritative.