The conversion: total inches × 2.54
Multiply the total inches by 2.54 to get centimetres: 5 ft 7 in is 5 × 12 + 7 = 67 in, and 67 × 2.54 = 170.18 cm. For the other direction, divide by 2.54 and split the inches into feet: 170 cm ÷ 2.54 = 66.93 in, which is 5 ft 6.9 in, or 5 ft 7 in to the nearest inch. The factor is exact, because the international inch has been defined as 25.4 mm since 1959, so when two converters disagree the difference comes from rounding. This one shows the 0.1-inch value and the nearest whole inch side by side, and it rounds the total before splitting it into feet, so it never prints 5 ft 12 in.
How to use this calculator
Type the height in the Height field the way you would write it: 5'7", 5 ft 7 in, 5 7, 67 in, 170 cm, 1.70 m or 1 m 70. Unit words in your own language work too.
Check the line under the field that says how the height was read. If you typed a number without a unit, choose the unit you meant: centimetres, metres, feet or inches.
Read the result in both systems: centimetres to 2 decimals and to the nearest whole centimetre, feet and inches to 0.1 in and to the nearest whole inch, plus metres, total inches and decimal feet.
If you want, pick a country to compare the height with the average 19-year-old there, then copy the result or share a link to it.
Where people use it
- •A form asks for height in the other system: a visa or passport application, a hospital intake sheet, a driving licence or a sports registration.
- •A dating, modelling or casting profile lists height in feet and inches and you think in centimetres, or the other way round.
- •A height measured in centimetres has to be compared with a chart printed in feet and inches.
- •A door, ceiling, bed or ladder height for a product listing: the arithmetic is the same for any length, not only for people.
Example: 5 ft 11.5 in and 182 cm
5 ft 11.5 in is 71.5 in, and 71.5 × 2.54 = 181.61 cm, or 182 cm to the nearest centimetre. To the nearest whole inch it is 6 ft 0 in, because half an inch rounds up. Going back, 182 cm ÷ 2.54 = 71.65 in, which is 5 ft 11.7 in and again 6 ft 0 in to the nearest inch. The two roundings moved the height by 0.39 cm, which is why a form that wants whole inches and one that wants whole centimetres can disagree by a centimetre for the same person.
Rounding, assumptions and when not to use this
- •The inch is exactly 2.54 cm, so rounding is the only reason two results differ. When a form asks for whole centimetres or whole inches, enter the rounded value it asks for, not the 2-decimal one.
- •A number typed without a unit is read by its size: below 3 as metres, below 9 as feet, below 90 as inches, otherwise as centimetres. 5.7 therefore means 5.7 ft (5 ft 8.4 in), not 5 ft 7 in; type 5'7 for five feet seven.
- •The country averages are NCD-RisC estimates for 19-year-olds in 2019, one birth cohort, with uncertainty intervals between about 1 and 5 cm wide. They are not the average of all adults and say nothing about whether a height is healthy.
- •For a child's growth, use the growth chart your doctor or health service uses. A unit converter cannot tell whether a height is normal for an age.
Frequently asked questions
How tall is 5'7" in cm?+
5 ft 7 in is 170.18 cm, which most forms round to 170 cm. The working is (5 × 12 + 7) × 2.54 = 67 × 2.54 = 170.18.
Is 170 cm the same as 5'7"?+
To the nearest inch, yes. 170 cm is 66.93 in, or 5 ft 6.9 in, which rounds to 5 ft 7 in. Exactly 5 ft 7 in is 170.18 cm, so the two figures describe the same height within 0.2 cm.
How many cm is 6 feet?+
6 ft 0 in is 72 in × 2.54 = 182.88 cm, usually written as 183 cm. 180 cm is a little shorter: 5 ft 10.9 in.
How do I convert cm to feet and inches?+
Divide the centimetres by 2.54 to get inches, then divide the inches by 12. The whole number is feet and the remainder is inches. For 160 cm: 160 ÷ 2.54 = 62.99 in, and 62.99 ÷ 12 is 5 with 2.99 in left over, so 5 ft 3.0 in, or 5 ft 3 in.
Is 5.7 feet the same as 5 feet 7 inches?+
No. 5.7 ft is a decimal: 0.7 of a foot is 8.4 in, so 5.7 ft is 5 ft 8.4 in, or 173.74 cm. 5 ft 7 in is 5.58 ft. If you type 5.7 here, the converter reads it as decimal feet and points out the difference.
Why do some converters show 5'7" as 170.2 cm?+
They round to 1 decimal place. The exact value is 170.18 cm. This page shows 2 decimals and the nearest whole centimetre next to each other and states its rounding rule, so you can enter whichever your form expects.
What is the average height of a man and a woman?+
It depends on the country. NCD-RisC estimated that 19-year-old men in 2019 averaged 170.8 cm worldwide, from 183.8 cm in the Netherlands to 160.1 cm in Timor-Leste, and 19-year-old women averaged 158.6 cm, from 170.4 cm in the Netherlands to 150.9 cm in Guatemala. The table on this page lists 31 countries.
Semantic next steps
Continue the calculation
These links move to a different input, formula or project stage rather than a keyword variation of this page.
Length Converter
Convert meters, centimeters, millimeters, kilometers, inches, feet, yards and miles with exact standard factors.
Feet and Inches Calculator
Add, subtract, multiply, divide or convert feet and inches, including decimal and fractional inch inputs, with decimal feet and metric equivalents.
Weight Converter
Convert kilograms, grams, pounds and ounces using standard mass conversion factors.
Centimeter Conversion Calculator & Table
Convert centimeters to inches, millimeters, meters and feet with exact factors, common values and a live converter.
Meter Conversion Calculator & Table
Convert meters to feet, inches, centimeters, millimeters and kilometers with a live converter and common-value table.
Free publisher widget
Put this calculator on your website
Give readers the live calculator without rebuilding the math. Copy the responsive embed in one click, or customize width, height, border and corner radius before publishing. The branded MAXScanner attribution stays visible.
Calculator embed HTML
Paste this code into your page. Focus the code box to select it manually.
Keep the result connected to the real job
MAXScanner keeps the formula and assumptions beside the result so you can verify the number before using it in a drawing, estimate, specification, worksheet or document. Where a supplier, manufacturer, drawing or applicable standard owns a requirement, that source remains authoritative.