Skip to main content

Find your next tool

Private browser image workspace

Make a Signature Transparent (PNG)

Turn a photo or scan of your signature, or of a red ink seal, into clean ink on a transparent PNG. Paper and shadows are removed on your device; nothing is uploaded.

A phone photo or scan of a signature or a red seal: JPG, PNG, WebP or HEIC. You can add several at once.
What is on the paper?

Keeps any ink darker than the paper: blue or black pen, gel, marker or pencil.

Ink colour
Output size

Processed on this device. Your signature is not uploaded.

Making a signature transparent in short

Photograph your signature on white paper, choose the photo and press Make transparent PNG. The paper, its shadow and stray specks become transparent and the ink is trimmed, so the PNG can sit on any document. Our 12-megapixel test photo of a blue ballpoint signature, half in a phone’s shadow, came out as a 1395 × 518 px PNG of 169.3 KB in 1.6 seconds, with no grey left from the shadow.

  • • Why PNG: PNG stores an alpha (transparency) channel. JPG does not, so a JPG signature always carries a white box.
  • • Ink colour: keep the colour you wrote with, or switch to black, ballpoint blue or seal red. Edges stay soft either way.
  • • Seal mode: for a red hanko, 도장 or 印章 it keeps red ink only and drops black print and blue pen under the stamp.
  • • Size: trimmed at full detail, a width in pixels, or a width in millimetres for a PDF (50 mm is 591 px at 300 dpi).
  • • Private: every step runs in your browser. The photo is not uploaded, and several photos can be done at once.

How to make a signature transparent

  1. 1

    Photograph or scan the signature

    Sign on plain white paper with a dark pen and photograph it in daylight, with the phone held flat above the page. On a phone, tap Take a photo; for pictures you already have, tap Choose photos (JPG, PNG, WebP or HEIC, several at once).

  2. 2

    Choose Signature or Red seal

    Signature keeps any ink darker than the paper. Red seal or stamp keeps only red ink, for a hanko, seal or company chop stamped over printed text.

  3. 3

    Check the preview

    The checkerboard shows what will be transparent. If faint strokes break up, raise Sensitivity; if paper grain or a shadow edge shows, lower it. Tap Original to see the dashed crop box, or Draw a box to keep only the ink inside your box.

  4. 4

    Pick the ink colour and the size

    Keep As written, or choose Black, Blue or Seal red. For a PDF, choose Width in mm and enter how wide the signature should be on paper; for a website, enter a width in pixels.

  5. 5

    Download or continue

    Press Make transparent PNG. Download the PNG, or all of them as one ZIP, or send the signature to Form Filler or Sign PDF without choosing the file again.

What we got from test photos

We drew five test photos ourselves (no real person’s signature): a blue ballpoint signature with a phone shadow across half the page, black gel pen on cream paper, a round red seal stamped over black print, blue ballpoint on ruled paper, and grey pencil. Each was run in Chrome on a desktop computer with the default settings unless the table says otherwise. Times include opening the photo.

What we got from test photos
Test photoSettingsOutput PNGFile sizeTime
Blue ballpoint, shadow over half the page (4032 × 3024 px JPG, 1.36 MB)Defaults1395 × 518 px169.3 KB1.6 s
Same photoWidth in pixels: 600600 × 223 px48.3 KB2.0 s
Same photoWidth in mm: 50591 × 219 px47.0 KB0.7 s
Same photoInk colour Black1395 × 518 px95.2 KB0.6 s
Black gel pen on cream paper (3000 × 2000 px JPG, 534.6 KB)Defaults1252 × 420 px182.4 KB1.7 s
Red seal over black print (2400 × 2400 px JPG, 639.3 KB)Red seal or stamp, Seal red935 × 1003 px, print dropped141.9 KB0.8 s
Same seal photoSignature mode2195 × 1807 px, print kept1.16 MB1.8 s
Blue ballpoint on ruled paper (2400 × 1600 px JPG, 432.7 KB)Remove ruled lines on1252 × 419 px166.1 KB1.7 s
Same ruled photoRemove ruled lines off2400 × 1597 px, lines kept560.9 KB1.6 s
Grey pencil (2400 × 1600 px JPG, 330.3 KB)Ink colour Black1247 × 415 px91.4 KB0.5 s

In a 390 px phone-sized window on the same computer the 12-megapixel photo took 2.2 seconds; an older phone can take several times longer. The PNG is made from a copy at most 2400 px on the long side, so a signature that fills half of a 12-megapixel photo comes out about 1400 px wide, more than double what a 50 mm signature needs at 300 dpi. File sizes depend on the photo: As written keeps the pen’s natural grain; one flat colour such as Black compresses better (95.2 KB instead of 169.3 KB for the first photo).

How the paper is removed

Paper is rarely white in a phone photo. The corner away from the window can be half as bright as the rest, so one brightness cut-off would keep the shadow as a grey smear. The tool first estimates the paper itself: it splits the photo into blocks about 1/24 of the long side, takes the brightness that 90 % of each block’s pixels reach (ink almost never covers more than a tenth of a block), smooths those values and interpolates them for every pixel.

Each pixel is then compared with the paper under it: darkness = 1 − pixel brightness ÷ paper brightness. Paper scores close to 0 in the light and in the shadow alike; ballpoint ink scores about 0.6 to 0.8. At Sensitivity 50, anything below 0.14 becomes fully transparent, anything above 0.26 fully opaque, and the values in between become a smooth ramp. That ramp is what keeps stroke edges anti-aliased instead of jagged.

Red seal mode measures redness instead: how far red is above the stronger of green and blue, minus the paper’s own redness. Black type and blue ink score zero, so they disappear even where the seal overlaps them, while vermilion seal ink scores about 0.4 to 0.65.

Then the clean-up: groups of ink pixels smaller than 0.002 % of the photo (dust, paper fibres, JPEG noise) are dropped, and Stroke weight adds or removes one pixel per step on the 1000 px preview and two on the 2400 px copy the PNG is made from. With As written, the ink colour is divided by the paper brightness, which takes the yellow of the paper and the grey of the shadow out of the ink itself.

Which file to use where
Where the signature goesUseWhy
PDF (Sign PDF, Form Filler, Acrobat, Preview)PNGA PDF keeps the PNG’s transparency as a soft mask, so the line under the signature stays visible.
Word, Google Docs, PowerPointPNGSet the picture to In Front of Text and the page shows through around the ink.
Exam or job portal that asks for JPGJPG on whiteJPG has no transparency, and portals check exact pixels and KB: use Make an exam signature JPG.
Email signature blockPNG at twice the display widthA signature shown 150 px wide needs a 300 px PNG to stay sharp on high-density screens.

Useful for real workflows

  • • Place your signature on a PDF contract, lease or permission slip without printing and scanning the page.
  • • Add a signature to a Word letter or a form so the printed line under it still shows.
  • • Turn a company seal, hanko, 도장 or 印章 stamped on paper into a transparent PNG for invoices and quotes.
  • • Clean up several signatures at once, for example for certificates signed by two people, and download them as one ZIP.

What to check before downloading

  • • Sign with a dark ballpoint, gel pen or felt tip on plain white paper. Pencil and pale blue ink need a higher sensitivity.
  • • Photograph in daylight from straight above. A soft shadow is removed, but a sharp shadow edge across a stroke can leave a trace.
  • • Let the signature fill about half the frame. A small signature in a 12-megapixel photo is still only a few hundred pixels wide.
  • • Check thin tails and the dot over an i on the checkerboard before you use the file.

Know the limits

  • • Lined paper: Remove ruled lines handles straight printed lines. Tilted or curved lines can stay, and a stroke may lose a few pixels where it crosses a line that is just as dark.
  • • Very faint pencil, a fax copy or ink barely darker than the paper grain may not separate cleanly. Signing again with a darker pen is faster than fixing it.
  • • A signature written over printed text keeps the dark text as ink in Signature mode. Draw a box around the signature, or sign again on blank paper. Seal mode drops black text, but only red ink is kept.
  • • If the photo shows the desk or the edge of the sheet, that edge can be kept as ink. Draw a box around the signature.
  • • An image of a signature is not a certificate-based digital signature, and an image of a seal is not a registered seal. For a document that must be verifiable, use Digital Signature, and check what the recipient accepts.

Private browser processing

The supported operation runs in your browser. Keep the original file and verify the downloaded copy against the destination’s current requirements.

Frequently asked questions

How do I make my signature transparent?

Sign on white paper, take a photo of it, and choose the photo on this page. The preview shows the ink on a checkerboard, which stands for transparency. Press Make transparent PNG and download the file. The paper, its shadow and small specks become transparent, and the ink is trimmed to a tight box.

Should I save my signature as PNG or JPG?

PNG. A PNG file has an alpha (transparency) channel, so only the ink covers the document. JPG has no transparency, so a JPG signature always brings a white or grey rectangle with it. Use JPG only when a portal asks for it, and then use a white background.

How do I put a transparent signature on a PDF?

Under the result, choose Sign a PDF with it, then open your PDF: the signature appears in the middle of page 1, where you can drag it to the signature line and resize it. For a printed or scanned form, choose Put it on a form instead and tap the signature line. Neither step uploads the file.

How do I make a signature transparent in Word?

Make the PNG here first; Word’s own Remove Background often leaves grey paper around thin strokes. In Word, choose Insert > Pictures, pick the PNG, then set Layout Options to In Front of Text so the page and the line under the signature show through.

Can I remove the paper from a red seal or stamp?

Yes. Choose Red seal or stamp. That mode keeps only red ink, so a hanko, 도장, 印章 or company chop comes out clean even when it was stamped over black printed text or blue handwriting. Seal red sets every pixel to one vermilion; As written keeps the stamp’s own uneven colour.

What size should a signature PNG be?

For a PDF, decide how wide the signature should be on paper, usually 40 to 60 mm, and choose Width in mm: 50 mm becomes 591 px at 300 dpi, which prints sharply. For an online form that states pixels and a KB limit, continue with Make an exam signature JPG, which hits exact pixels and a KB band.

Is my signature uploaded?

No. The photo is decoded, cleaned and saved as a PNG by your browser on your device. Handing the PNG to Form Filler or Sign PDF also stays in this browser; nothing is sent to MAXScanner’s servers.

Can I do this on my phone?

Yes. Tap Take a photo to use the camera, or Choose photos for pictures you already took, including iPhone HEIC photos. The preview runs on a copy of at most 1000 px and the PNG is made from at most 2400 px, so 12-megapixel photos work on phones with little memory.

Browse all image tools