What this calculator actually models
A useful paver estimate separates surface coverage from layer volume. Paver count comes from project area divided by the face area of one paver; base and bedding quantities come from the layer depths you enter rather than a hidden “standard” depth.
How to use this calculator
Enter the rectangular project size in feet and one paver’s face dimensions in inches.
Choose the waste allowance that matches the layout and cuts.
Enter the base and bedding depths required by your project; optionally add a paver price for a simple piece-cost estimate.
Where people use it
- •Patios and walkways
- •Paver quantity comparisons across different sizes
- •Early base/bedding material planning
Example: 20 × 10 ft patio with 8 × 4 in pavers
The project is 200 sq ft and each paver face is about 0.2222 sq ft, so 900 pavers cover the geometric area. A 10% allowance raises the order tally to 990 pavers before supplier pack rounding.
Assumptions and limits
- •Base and bedding thicknesses depend on soil, load, climate, product and installation specification; this calculator does not prescribe them.
- •Edge cuts, patterns, borders and pack quantities can change the number ordered. Verify manufacturer and project requirements before purchasing.
Frequently asked questions
How many pavers do I need?+
Divide the project area by the face area of one paver, then apply only the waste allowance appropriate to the layout and round up.
Does the calculator choose my base depth?+
No. Enter the layer depth required by your design, manufacturer or local practice.
Does the cost include sand, base or labor?+
No. The optional price input is a simple paver-piece cost only.
Semantic next steps
Continue the calculation
These links move to a different input, formula or project stage rather than a keyword variation of this page.
Square Footage Calculator
Calculate square footage for rectangles, circles and triangles, convert the area to square meters and estimate cost from a price per square foot.
OpenGravel Calculator — Cubic Yards & Tons
Estimate gravel volume from length, width and depth, add a project allowance and convert cubic yards to tons using a density you can verify with the supplier.
OpenConcrete Calculator — Slab and Cylinder Volume
Estimate concrete volume for a rectangular slab or cylindrical pour in cubic feet, cubic yards and cubic meters, with an optional waste allowance.
OpenFeet and Inches Calculator
Add, subtract, multiply, divide or convert feet and inches, including decimal and fractional inch inputs, with decimal feet and metric equivalents.
OpenBoard Foot Calculator — Lumber Volume & Cost Basis
Calculate board feet from lumber thickness, width, length and quantity, then add an optional waste allowance for a project tally.
OpenBrick Calculator — Bricks, Mortar, Cement, Sand & Cost
Estimate bricks for one or more walls after opening deductions, then calculate wet and dry mortar, cement bags, sand volume and optional material cost from actual brick dimensions and mortar-joint inputs.
OpenConcrete Block Calculator — CMU Blocks, Mortar, Grout, Pallets & Cost
Estimate concrete blocks for a wall after opening deductions, then plan mortar bags, pallets and optional core-fill grout from actual block-face dimensions and editable product coverage, void fraction and bag-yield inputs.
OpenTank Volume Calculator — Capacity, Partial Fill, Gallons, Litres & Weight
Calculate total and partial-fill volume for rectangular, vertical-cylinder, horizontal-cylinder, horizontal-elliptical, horizontal-capsule and spherical tanks, with litres, US/Imperial gallons, remaining capacity, liquid weight and optional fill/drain time.
OpenMore in this calculator collection
Browse nearby calculators in the same topic cluster so related pages reinforce each other instead of sitting as isolated URLs.
Free publisher widget
Put this calculator on your website
Give readers the live calculator without rebuilding the math. Copy the responsive embed in one click, or customize width, height, border and corner radius before publishing. The branded MAXScanner attribution stays visible.
Keep the result connected to the real job
MAXScanner keeps the formula and assumptions beside the result so you can verify the number before using it in a drawing, estimate, specification, worksheet or document. Where a supplier, manufacturer, drawing or applicable standard owns a requirement, that source remains authoritative.