The calculation, without hidden assumptions
Estimate a solid rectangular plate from transparent volume × density physics. Switch common metals or enter a verified custom density, then audit batch mass, area loading, optional material cost, target thickness and measured-weight variance.
How to use this calculator
Choose the dimension and output-weight units used on your drawing or stock list.
Select a nominal material density or choose Custom and enter density from your material data.
Enter finished plate length, width and thickness; use quantity for identical pieces.
Optionally enter price per kilogram for raw-material planning.
Optionally enter a target weight to reverse-solve thickness or a measured plate weight to audit effective density.
Where people use it
- •Estimate mild-steel plate mass before purchasing or transport planning.
- •Compare steel, stainless, aluminum, copper, brass and titanium plate weights for the same envelope.
- •Calculate total batch tonnage for identical blanks.
- •Reverse-size nominal thickness for a target mass before checking available stock gauges.
- •Compare a measured plate against nominal geometry and density without silently changing the planning result.
1,000 × 500 × 12 mm carbon-steel plate
At the nominal carbon-steel density of 7,850 kg/m³, a 1,000 × 500 × 12 mm solid plate has 0.006 m³ volume and weighs 47.10 kg. Ten identical plates weigh 471.0 kg before packaging.
What the result does not assume
- •Density presets are nominal planning values, not grade certificates. Exact alloy chemistry and temperature can shift density.
- •The solid-plate model does not subtract holes, slots, bevels or other cutouts. Model those separately when their volume is material.
- •Coatings, galvanizing, scale, protective film and attached hardware are excluded unless represented in measured mass.
- •Nominal thickness can differ from measured thickness within manufacturing tolerances; do not invent a universal tolerance.
- •For cranes, hoists, racks, structural loads or freight declarations, verify the actual product specification and measured mass.
Frequently asked questions
How do I calculate steel plate weight?+
Convert dimensions to consistent units, multiply length × width × thickness for volume, then multiply by the steel density. MAXScanner shows the substituted calculation rather than hiding it behind a shortcut constant.
What density does the calculator use for carbon steel?+
The carbon-steel preset uses a nominal 7,850 kg/m³. For a grade where the supplier publishes a different value, choose Custom and enter that verified density.
Can I calculate aluminum plate weight?+
Yes. Select Aluminum 6061 for the nominal 2,700 kg/m³ preset, or use Custom for another alloy density from its material data.
Does this include holes or cutouts?+
No. The owner models a solid rectangular plate. Subtract the verified volume and mass of holes or cutouts separately when they are significant.
Can I calculate thickness from a target weight?+
Yes. Enter a target plate weight and the calculator reverse-solves thickness using the selected material density and entered face dimensions.
Why might the actual plate weight differ?+
Actual dimensions, alloy density, mill tolerances, coatings and cut features can all differ from nominal inputs. The optional measured-weight diagnostic shows the effective density implied by your measurements without overwriting nominal math.
Semantic next steps
Continue the calculation
These links move to a different input, formula or project stage rather than a keyword variation of this page.
Coil Weight Calculator — OD, ID, Width & Density
Calculate theoretical steel or metal coil weight from OD, ID, width and density, plus PIW, strip length, run time, capacity utilization and reverse maximum OD.
Gross Weight Calculator — Net to Gross Shipment Weight with Cartons & Pallets
Turn net product weight into gross shipment weight: add unit packaging, carton tare, pallets and other packing, round to whole cartons, and get carton-mark weights, a per-pallet average and kg and lb totals for the packing list.
Density Calculator — Solve Density, Mass or Volume + Units
Solve density, mass or volume from any two known values with SI, metric and US customary units. See equivalent density units, specific gravity and substituted working.
Area Calculator — Rectangle, Triangle, Circle, Trapezoid & More
Calculate area for rectangle, square, triangle, circle, trapezoid, parallelogram, ellipse and sector shapes with editable units, converted output units and the substituted formula shown.
Force Converter — Newtons, kN, lbf, kgf & Kip
Convert force between N, mN, kN, MN, lbf, ozf, kip, kgf, gf, dyne, poundal and US ton-force, with all equivalents, adjustable precision and clear mass-versus-force guidance.
Bend Allowance Calculator — K-Factor, Deduction & Flat Length
Calculate sheet-metal bend allowance, outside setback, bend deduction and single-bend flat length in mm or inches, with reverse K-factor calibration.
Duct Weight Calculator — Sheet Metal kg/m & Total
Calculate rectangular or round HVAC duct sheet-metal weight per metre and total project mass from dimensions, thickness, density and fabrication allowance.
Cable Ladder Weight Calculator — kg/m & Total
Estimate cable ladder self-weight from two side-rail linear masses, rung linear mass, ladder width and rung spacing; compare the result with manufacturer kg/m.
Several shapes and metals in one order
More in this calculator collection
Browse nearby calculators in the same topic cluster so related pages reinforce each other instead of sitting as isolated URLs.
Free publisher widget
Put this calculator on your website
Give readers the live calculator without rebuilding the math. Copy the responsive embed in one click, or customize width, height, border and corner radius before publishing. The branded MAXScanner attribution stays visible.
Calculator embed HTML
Paste this code into your page. Focus the code box to select it manually.
Keep the result connected to the real job
MAXScanner keeps the formula and assumptions beside the result so you can verify the number before using it in a drawing, estimate, specification, worksheet or document. Where a supplier, manufacturer, drawing or applicable standard owns a requirement, that source remains authoritative.